1. Remove the test strip from the aluminum bag.
2. Remove the cap to expose the absorbent tip.
3. Hold the device with the absorbent tip facing down. Place the tip in contact with the urine (under the stream or submerged in a collection container) for at least 15 seconds until it is completely wet.
4. Replace the cap and place the test device on a flat surface with the windows facing up while waiting for the test result. Read the result in 3 minutes, do not interpret after 10 minutes.
Tip: It is preferable to use the first urine of the morning, as it contains a higher concentration of the hormone HCG.
How it should be stored and for how long it should be used:
It should be used within 1 hour of opening the aluminum bag; if the temperature is above 30°C or in a high humidity environment, it should be used immediately.